Batteries are not just the foundation of your fleet; the cost of lead acid and lithium batteries also increases yearly. Every organisation must now make sure that they are using their batteries to their best potential while also increasing the battery’s lifespan because the average battery costs between $18k and $22k per battery. But because a battery is merely a black box, how can you be certain you are doing that?
We’ve put together some advice to help you extend the lifespan of your battery by 2 more years so you can get the most out of your investment.no matter which brand of battery you have, whether its poweroak UK or any other, taking care of battery is important.
Here are 7 Suggestions to Help You Prolong The Life of Your Battery by an Additional 2 years:
Keep Your Battery From Going Fully Dead.
Sulfation can happen if a battery is discharged below 15% for an extended period of time. Sulfation will stop the electron flow if it begins to build up, lengthen the charging time, and significantly lower the battery’s productivity and lifespan.
Following a precise maintenance schedule and regularly monitoring battery charge levels are essential to preventing a battery from totally draining. Batteries should never be allowed to fall below 20% for a prolonged period of time.
Don’t Charge The Battery Too Much.
A lead-acid battery’s water levels will drop and its temperature will rise while it is being charged at an excessive voltage. The battery may suffer serious damage when water levels drop and temperatures rise, which would be bad for the battery’s performance and longevity.
Additionally, because each battery has a maximum number of charge cycles it can endure before losing its efficiency, the frequency of charging can also have an impact on a battery’s longevity. In light of this, it is not necessary to charge a battery every time there is a chance for downtime because with each charge, you come closer to the maximum number of charge cycles, which will cause the battery to need replacement sooner.
It is essential that you are aware of the correct charging instructions specified for each type of battery in order to avoid overcharging or charging a battery too frequently. You can make sure each battery is getting the appropriate amount of charge at the appropriate times by using a battery management device.
Don’t Overwork The Machinery.
There is a particular pound load rate for each battery. A forklift that picks up a load heavier than the battery’s recommended weight will compel the battery to deliver more current than it was intended to. The battery may suffer serious damage as a result of the high temperature caused by the increase in current.
Every operator must be aware of the maximum load weight for each battery powering that equipment in order to prevent battery abuse and ensure that you never overload your equipment.
Batteries Shouldn’t be Kept in a Harsh Environment.
Battery performance and durability are significantly impacted by the temperature of the storage area. Batteries should be kept in a cool, dry environment with a temperature of about 59°F (15°C) for optimum performance. Avoid locations with direct sunlight or close proximity to freezers to ensure your batteries are stored in the best possible environment.
Keep The Battery Clean, Please.
Always clean a battery right after any spillage to prevent corrosive harm to the battery and the surrounding area. A spill’s effects will only worsen over time if left unattended, significantly shortening the battery’s life. Each battery should have a rigorous inspection routine in place to ensure that no residuals have been leaked.
Make That Water Levels are Maintained at The Appropriate Level Recommended by The Manufacturer.
For batteries to operate properly, constant hydration is necessary. There could not be enough water to cover the plates before a charge if water levels are too low. When water levels are too high, the battery may overflow, which may result in damage. It’s crucial to utilise pure distilled water at all times in addition to keeping appropriate water levels.
Utilise battery management devices that track the electrolyte and water levels so that you are alerted if either level ever goes too low or too high to ensure your water levels stay at their appropriate level.
When It’s Time, Equalise Lead-acid Batteries.
A battery’s internal chemistry becomes more out of equilibrium the longer it is used. Sulphate coatings in lead-acid batteries can build up over time, lowering the battery’s total capacity and, in severe situations, making it useless. Equalization, a standard method used to avoid and remove any sulphate buildup, is just a purposeful overcharge.
Experts advised equalising your batteries once a month to once or twice a year, depending on how frequently your battery is used, to maintain a healthy battery and prevent the formation of sulphate.
Conclusion:
Batteries can be a real pain to deal with. One minute, they are performing at their best, and the next, they are out of juice and you are left with a piece of useless technology. But there are some methods you can use to help extend the life of your batteries. For example, try not to drain the device battery all the way before you recharge it.
It is best to plug your device in when it still has about 20% power left. If you plug it in when it is completely dead, it may not be able to completely charge back up. Another helpful tip is to remove the batteries from the device if you will not be using it for an extended period of time. This will prevent the batteries from losing power and becoming completely dead. We recognize that each of these procedures can be challenging and time-consuming, particularly if you have a warehouse or distribution centre packed with machinery and workers requiring the majority of your attention and time. Because batteries are so expensive so it’s our duty to take care of it. You can buy batteries at a discounted price by using discount codes UK. it will make your battery purchase frugal.
