If your MacBook Air displays a black screen of death when you turn it on, don’t panic; even though you won’t be able to operate it regularly or access its contents, it doesn’t necessarily imply that your device is doomed.
There are two circumstances that you can be dealing with. One of them is when hitting the power button results in no response; the MacBook won’t come on at all. The second is when you notice a response from your Mac, such as when your MacBook Air displays a black screen with a chime, the screen of your MacBook vanishes after a short period of starting, or the screen of your MacBook.
You must be wondering about the causes of the black screen issue on a Mac such as a MacBook Air. So, before you opt to go for a MacBook Air screen replacement, try to understand the reasons for the same.
Four Major Reasons for MacBook Air Black Screen Problem
1. Software or firmware issues
It happens when you recently updated to a new version of macOS or firmware. The latest upgrades can have unresolved bugs, compatibility problems, or extremely high disc space requirements.
2. Hardware damage
Hardware problems are a likely cause of your Mac’s unresponsive black screen if you’ve recently dropped or bent the screen.
3. Power issues
If the power is insufficient, the battery is past its cycle count, or both, the Mac launches into a black screen.
4. Poor contact
A computer is composed of lots of hardware and firmware. But the computer won’t start up normally if the contacts between them are loose, dirty, or damaged.
Additionally, people are still unsure of a few additional causes of motherboard failure. If you ever find yourself in this risky circumstance, your best course of action is to first recover your Mac’s files to prevent irreparable loss. Then, adhere to the complete fixes to resolve the MacBook Air won’t switch on problems.
How to Resolve the Macbook Air Black Screen Problem
There are a few tried-and-true techniques you can use to fix your space gray MacBook Air’s dark screen. To bring your Mac back to normal, try each of them one at a time.
1. Check the power supply
The MacBook Pro screen occasionally goes dark after a few minutes of booting, or the MacBook occasionally displays a black screen while the startup bell is still playing. In this situation, make sure your Mac’s battery has adequate power to run the starting processes.
You can plug in the charger, wait a few minutes, and then hit the power button to fix that problem. It also assists in warming up the rear of your MacBook first in some frigid settings.
When your Mac is charging, check the condition of the charger cable as well. In addition, see if your battery needs to be replaced by checking its cycle. Restart your Mac if the power issue has been resolved. Your MacBook will then start up normally and not boot into a black screen.
2. Perform power cycling
If the hard disc or fans are spinning when the computer first starts up, or if the keyboard lights up, the problem with the black screen is not due to a power shortage. You must attempt to power cycle your Mac if it doesn’t respond when you click the button or open the lid.
You can long-press the power button to shut down a current MacBook without a detachable battery, wait 10 seconds, and then restart the laptop. You can forcefully shut down some older MacBooks, like the MacBook Air 13″ and MacBook 13,” unplug them, remove the battery, and then wait for 10 seconds. After that, you must restart the Mac and replace the battery.
3. Disconnect the peripherals
Sometimes peripheral devices are the reason your Mac won’t start up properly. This occurs as a result of a thorough hardware inspection that is carried out during startup; if any problematic components are found, the procedure will be terminated.
Therefore, to fix this problem, unplug all external devices, including USB drivers, phones, printers, and other devices. Press the power button or Touch ID button on your MacBook one more to restart your computer.
4. Check the display’s brightness settings
Your MacBook’s black screen issue frequently arises not from a startup issue but rather from the monitor having been dimmed. By using the F2 key, you can restore your screen’s brightness after unintentionally tapping the F1 key, which usually results in an extremely dim display.
5. Wake up your Mac from sleep mode
If your Mac displays a black screen with a cursor, this indicates that the laptop briefly becomes stuck on the black screen before entering sleep mode.
You can enter the first letter of the user name to wake up your Mac from sleep.Mac will respond to you after realizing that you entered the incorrect information and consequently, it will withdraw from the black screen situation.
6. Reset SMC
System Management Controller, sometimes known as SMC, is in charge of how your Mac manages power. Resetting SMC will resolve the boot issue and reset power management-related settings.
- First, turn off your Mac.
- Press and hold the power button for 10 seconds while simultaneously holding down the Shift, Control, and Option buttons.
- Release the keys in step three.
- Restart your Mac after that to observe what happens.
7. Reset NVRAM settings
Mac’s NVRAM keeps settings like display resolution, startup disc choice, recent kernel panic data, etc. in memory. Therefore, resetting NVRAM might be useful for resolving the black screen of death on the MacBook Pro.
To reset the NVRAM settings:
- To restart your Mac or MacBook, hold down the Option, Command, P, and R keys at the same time.
- When you hear a second startup sound, let off the keys. Release the keys once the Apple logo appears and disappears twice on a Mac with a T2 chip.
Closing Thoughts
It’s not the end of the world if your MacBook Air or MacBook Pro won’t power on and boots into a black screen. You can look for answers in this thread or ask an MacBook Air screen replacement expert for help.
Anyhow, before making any repairs if your Mac won’t boot, please check to see if you have a file backup or have recovered data using data recovery software. Otherwise, you risk losing all of your files on
