Home » Netgear Nighthawk EX8000 Setup Guide

Netgear Nighthawk EX8000 Setup Guide

by Nathan Zachary
netgear nifghthawk ex8000 setup

The Netgear Nighthawk EX8000 setup is a Triple Band wifi repeater that is incredibly simple to use. The Nighthawk AC3000 includes a dedicated 5 GHz band that can handle rates of up to 1.7 Gbps, which you may enhance to accommodate your PCs. There are numerous ways to configure a Netgear EX8000, which are listed below:

Connect your EX8000 gadget to a WPS Wi-Fi network. The easiest way to configure your EX8000 Wi-Fi extender is via secured setup, which does not need you to log into any of your computers or provide any information.

 Login process of Netgear Nighthawk  EX8000

To log in to your Netgear AC1200 extender, follow the steps below:

  • Open a web browser on a smartphone or tablet connected to your extender’s network.
  • If your extender and router have different WiFi network names, type mywifiext.net into the address bar of your web browser (SSIDs).
  • If your extender and router share the same Wireless internet name, type http://extender’s IP address> into your browser’s email box (SSID).
  • Press the ENTER key.
  • Please enter your username and password.
  • Click the login button.
  • Select Settings to examine and alter the extender’s options.

So here your login process of Netgear AX1800  Extender setup is successfully completed.

How to setup Netgear Nighthawk EX8000  

Follow the instructions given below to setup your Netgear Nighthawk  EX8000- AC3000:

  • Activate your extender and choose a cable or wifi connection to link it to your internet.
  • Open your preferred web browser after your PC or smartphone has connected.
  • Use the URL myWiFiext.net to access the login page for the extender, and enter your username and password in the appropriate fields.
  • On your PC, the Netgear Genie page will now display.
  • Then, depending on how your system is set up, you have to pick one of two possibilities.
  • Simply choose Save after making your selections to finish configuring your Netgear EX8000 .

Netgear  Nighthawk EAX8000  setup via Manual Method 

Additionally it is also  known as web browser setup, the manual method. Follow the steps below to learn how to manually configure a Netgear WiFi extender:

  • First, connect the Netgear extender to a plug box and turn it on.
  • Connect your Netgear Nighthawk  extender to your router.
  • Link to Netgear_ext SSID by selecting the network management.
  • any web browser
  • By default, go to the mywifiext login page.
  • Create an account there if you don’t already have one.
  • After selecting next, touch the finish button.

You have successfully finished the manual setup of your Netgear AX1800 Extender.

Netgear Nighthawk  EX8000 Setup via WPS 

WPS (WIFI PROTECTED SETUP) is the simplest method for configuring the Netgear wifi extender. Please follow the steps outlined below:

  • First, turn on your extender.
  • Now, hold down the WPS button for a few seconds.
  • After that, your LED indicator will turn green, indicating that your extension and router are properly linked.
  • Repeat the process using the dual band range extender.
  • Use the same network password you’d use for your router’s network here.
  • You may find the default username and password in the WIFI extension instructions.
  • Finally, connect your wifi equipment to the enhanced Netgear_ext SSID.

Your Netgear Nighthawk EX8000 setup using the WPS technique is now complete.

Netgear EX8000 setup without WPS

If you wish to configure your EX8000 AC3000 without WPS, follow the instructions below:

  • Connect your EX8000 AC3000 to an electrical outlet and wait for the LED light to stabilise.
  • Keep the router and extender in the same location.
  • It will take some time to get going.
  • Connect your extender to the router now.
  • The LED light will turn green after connecting the extender to the router.
  • Launch your preferred web browser.
  • Now go to mywifiext.net and enter your information, including your login and password.

Your Netgear EX8000  setup without WPS is now complete.

Troubleshooting steps:

Follow the troubleshooting methods below to resolve difficulties faced during Netgear AC3000 Extender setup:

  • The Nighthawk EX8000 extender’s primary power source is properly connected.
  • Examine your electrical outlet to ensure that it is not damaged or shorted out.
  • Make use of a fast internet connection.
  • Check that each cable is properly attached.
  • Only use undamaged wires.
  • Place your extension inside the signal range of your router. Check your spelling in the address bar if mywifiext.net isn’t working.
  • Update the firmware on your extender to the latest recent version.
  • Return the Netgear EX8000 extender’s settings to their original levels.

How do I change the firmware on my Netgear Nighthawk  EX8000

Let’s go through how to test the firmware on a Netgear EX8000  wireless extender:

  • Before changing the firmware, make sure your EX8000 extender is properly plugged into a power outlet.
  • Connect your PC or mobile device to the Nighthawk Ext network.
  • Start a web browser and type www.mywifiext.net into the address box once you’ve established a connection.
  • You have arrived at the Netgear Nighthawk EX8000 Extender website.
  • Enter your passwords to access your account.
  • It will take a few minutes to check for firmware updates.
  • You may begin updating the Netgear AC3000 extender’s firmware by selecting “Yes.”

NOTE: Do not unplug or remove the Netgear EX8000 from the electrical outlet when installing the most current firmware.

How to reset Netgear Nighthawk  EX8000 

  • To reset the Netgear setup, perform these steps:
  • When you switch on your extension, the LED lights will become green.
  • It will take at least 5 minutes to stabilise the LED lights on your extension.
  • Find the reset button on your extender.
  • Now, using a comparable sized object, hold the reset button for up to 10 seconds until the LED light begins to flicker.
  • It will take at least 5 minutes to stabilise the LED lights on your extension.

Your Netgear wifi extender has been successfully reset.

Mywifiext.net  and Mywifiext.local are the same words, so if you are still having issues, you may verify your default login IP address, call us at our toll-free number, or chat online with one of our specialists.

Related Posts

Techcrams logo file

TechCrams is an online webpage that provides business news, tech, telecom, digital marketing, auto news, and website reviews around World.

Contact us: info@techcrams.com

@2022 – TechCrams. All Right Reserved. Designed by Techager Team