If you need a new roof installation in Arlington, VA, you’ll want to prepare your home before the new roofing company arrives. There are several steps that you should take to ensure that the installation process goes smoothly and as quickly as possible. Below are some of the most important things that you should do before your new roofing contractor shows up at your door.
The first thing you need to do is clear your gutters and downspouts.
1. Make sure the area around your home is free of debris and clutter. 2. Clear the gutters and downspouts of any leaves or other debris. 3. If you have a rake or shovel, clear away any leaves that may have fallen on the roof itself. 4. If there are evergreen branches on your roof, cut them off at ground level if possible before they can do further damage to your roof by weighing it down with snow or ice during winter months. 5. You may need to brush away any pine needles that have found their way onto the roof as well – these needles can really take their toll on your shingles over time! 6.
Next, you’ll want to trim any tree branches that are hanging over your roof.
Now that you’ve cut down any tree branches roof maintenance Arlington VA, it’s time to prepare the roofing materials. Start by removing any snow or ice from the roof with a snow shovel. Next, cover all vents and other openings on the roof with plastic sheets or tarps. Finally, you can remove any bushes or plants that are too close to the edge of your home’s foundation.
Once you’ve taken care of those two things, you’ll need to gather up all the loose shingles and nails around your property.
It’s important to start by evaluating the roof installation. Once you’ve taken care of those two things, you’ll need to gather up all the loose shingles and nails around your property. You’ll want to use caution when handling these because they can be sharp and you don’t want anyone getting hurt. A garden rake with a long handle is perfect for this task because it will allow you to reach under the roof without any risk.
1) Begin by cutting off any protruding nails with a pair of pliers or wire cutters so that they do not scratch people or pets that are walking on the ground near your home.
2) Using your garden rake, scrape as many loose shingles off as possible and then sweep up all remaining debris into piles.
Finally, make sure to have a dumpster or other form of disposal ready for the old shingles.
For the installation of your new roof, it’s important that you prepare your home beforehand. The first step is to remove any loose shingles on the roof. Shingles should be removed one at a time and set aside so they don’t get mixed up with the new ones. Next, sweep offs any debris and leaves from the roof decking. You may want to use a leaf blower or broom if sweeping doesn’t do the trick. If you have gutters installed on your house, make sure they are clean before you start removing shingles. Finally, make sure you have a dumpster or other form of disposal ready for all of your old shingles; they can’t be thrown out with roof installation Arlington VA!
